Home  |  About Us Products  |  News  |  Literatures  |  Sitemap  |  Contact Us          Innovative Technology for High Temperature

ISOTEK HT-72 Alumina Fiber Veneer Module

ISOTEK HT-72 Veneer Module is made from high purity polycrystalline fibers, designed for improvement of the thermal insulation of existing industrial furnaces by cementing them on the hot face of other refractories. ISOTEK HT Veneer is totally binder free. Noted for high temperature resistant up to 1600°C, the veneer provides superior insulating performance at elevated temperature and chemical stability resisting attack from most corrosive agents.

Classification Temperature     1600°C
Density: 100kg/m3


Super chemical stability
Low thermal conductivity
Resistance to thermal shock
Improves furnace efficiency without replacing a  serviceable refractory lining



200 x 100 x (30-80)mm



Reheating furnaces
Heat treatment furnaces
Tunnel kilns


Quick Links: frequent use refractory products for furnaces, kilns, kiln cars, ovens, heaters, incinerators, chimney, heat exchangers, gas pipe, duct...

Ceramic Fiber Modules | Ceramic Fiber Blankets | Ceramic Fiber Boards | High Temperature Alumina Fiber Board | Front Panel System up to 1800°C
Insulating Firebrick | Ceramic Fiber Heaters | Heating Element Supports | Refractory Fiber Mastics | Ceramic Fiber Castables | Cements | Coatings | Ropes

Home | About Us | Products | News | Literatures | Sitemap | Contact us | Chinese